PolyU Provides Multi-disciplinary Support to the Nation's Historic Landing on the Far Side of the Moon

HONG KONG, January 14, 2019 /PRNewswire/ --

The Hong Kong Polytechnic University (PolyU) proudly supported the nation's current lunar exploration, Chang'e-4 lunar probe, which successfully performed the historic landing on the far side of the Moon on 3 January 2019. Adopted by Chang'e-4 mission was PolyU's advanced technologies, namely the design and development of an advanced Camera Pointing System, and an innovative lunar topographic mapping and geomorphological analysis technique in landing site characterisation for the space craft.

     (Photo: https://mma.prnewswire.com/media/807927/PolyU_lunar.jpg )

"PolyU is very honoured to be involved in and to make contributions to the nation's lunar missions, in particular in this debut landing on the far side of the Moon, the first-ever in the history of mankind," said Professor Alex WAI, Vice President (Research Development), PolyU. "PolyU attaches great importance to the mission and mobilises multi-disciplinary resources to ensure the deliverables meet the stringent requirements of a space mission."

Landing site characterisation 

For the first lunar mission in the world to land a space craft on the far side of the Moon, the selection of a safe landing site with scientific value is of paramount importance. Dr Bo WU, Associate Professor of Poly's Department of Land Surveying and Geo-Informatics, has led a team to conduct a research titled "Chang'e-4 Landing Site - Topographic and Geomorphological Characterisation and Analysis" since March 2016.

Funded by the China Academy of Space Technology (CAST), the team amassed a large amount of lunar remote sensing data from multi-sources to create high-precision and high-resolution topographic models for two potential landing regions, one of them is the current Chang'e-4 landing site, the Von Kármán crater inside the South Pole - Aitken basin on the far side of the Moon.

Dr Wu and his team studied two landing regions for Chang'e-4 mission, each covering an area of about 1,500 square kilometers, which is 1.4 times of the total area of Hong Kong. They analysed in detail the terrain slopes, terrain occlusions to sun illumination and telecommunication, crater distribution, rock abundance, and geological history of the region. These analyses helped the team to put forward a sound and evidenced-based proposal of possible landing sites.

The team gathered information of more than 400,000 craters and over 20,000 boulders in the candidate landing regions. It had also analysed the terrain surface and calculated the gradient of the slopes to identify relatively flat sites for safe landing. Rock abundance of the region had to be considered in detail because boulders can be as large as 35 metres in diameter and can block the way of the rover, whereas small rocks may get into the wheels, hence creating problem in the rover's movement.

"The Chang'e-4 landing site is on the far side of the Moon, without direct radio communication from Earth," said Dr Wu. "In addition, the terrain surface of the landing region is also very rough with elevation differences up to 16km, which required a nearly perpendicular descent design. These made the mission very challenging."

The study in terrain occlusions to sun illumination and telecommunication is particularly important to ensure good illumination conditions to charge the solar panels on the lander and rover so that the onboard scientific sensors can be functional, and ensure good signal reception and data transmition between the control center on Earth and the lander and rover.

After the successful landing of Chang'e-4 on 3 January 2019, the team worked together with the CAST team to immediately locate the precise location of the lander and analysed the terrain occlusions to sun illumination and telecommunication around the lander for better scheduling of action of the lander and rover.

Dr Wu is excited to get involved in the project. "When I started my career in surveying, I have never dreamed of taking part in space exploration missions. But all things are possible if we are bold in taking out that one step," he shared.

Camera Pointing System 

Prof. Kai-leung YUNG, PolyU's Chair Professor (Precision Engineering) and Associate Head of Department of Industrial and Systems Engineering also leads a team to contribute to the nation's lunar probe by developing the Camera Pointing System (CPS) jointly with CAST.

The CPS weighs 2.8 kg and measures 85 cm (length) by 27 cm (width) and 16 cm (depth). Mounted on the upper part of the lander of Chang'e-4, CPS is capable of moving vertically by 120 degrees and rotating sideway by 350 degrees, under Moon's gravity (i.e. one sixth of Earth's gravity). It is deployed for capturing images of the Moon as well as facilitating movement of the lunar rover.

The design of the sophisticated CPS is extremely complicated. To withstand the stringent environment and to ensure the proper functioning of the device once landed on the Moon, all electrical parts, signal lines and wirings are installed inside the product shell. A well-designed, complicated, precise interior structure has to be machined to install and protect all wirings properly. Good multi-axis machining know-how and experience is a must to complete this project.

The far side of the Moon receives high density of radiation and is exposed to extreme temperatures. The CPS therefore needs to be protected by the product shell with good surface finish and treatment to reflect the radiation and heat. And to avoid corrosion and rusting, the number of assembly parts and joints have to be minimised. As a result, many parts were specially combined to form one single component in the design stage and were machined and fabricated by removing unnecessary materials from one single solid material block. The process is far more complicated and time-consuming and needs high precision machining process design and know-how.

The CPS was delicately manufactured in PolyU's Industrial Centre, a key member in the project that played a pivotal role in producing space instruments to meet the stringent requirements in design and features for space deployment.

"I am very proud to be able to take part in the first-ever landing mission for mankind," said Prof. Yung. "I shall continue to work for the nation's space explorations."

PolyU's continuous support and future endeavour 

The expert teams have been working to support the nation's lunar missions for years. The CPS developed by Prof. Yung's team was first adopted by Chang'e-3 launched in 2013. That is the first Hong Kong-made and developed instrument being deployed for the nation's lunar exploration programme. The functionalities and performance of CPS were proved to have met the stringent requirements as the two sets of CPS operated smoothly as planned after the landing of the space craft.

Dr Wu's team also worked on the topographic mapping and analysis of the landing site of the Chang'e-3 mission in 2013, and made contributions to the strategic planning and selection of the landing site for Chang'e-3.

"The ultra-high standard of the research outcomes delivered by PolyU in the space projects confirm our competence in innovation and technologies. PolyU has been consistently delivering our research promise: to translate our research into impactful and practical technological solutions. In the future, PolyU continues to adopt a cross-disciplinary approach and integrate our pool of expertise and resources to develop sophisticated, appropriate and effective solutions for the nation's space exploration programmes, including Chang'e-5 lunar mission and the nation's first mission to explore Mars later," said Prof. Wai.

About PolyU  

The Hong Kong Polytechnic University (PolyU) has a total student population of about 28,000. Through our faculties and schools, the University connects education and research to the real world as manifested in our motto: "To learn and to apply, for the benefit of mankind". Through an innovative education model combining professional knowledge with Service-Learning and real-world experience, PolyU has nurtured many bright minds to serve and contribute to the community. We also challenge boundaries and uncover knowledge, bringing many practical yet world-changing ideas to life for the benefit of mankind. These efforts reflect our commitment as described in the University's brand promise - "Opening Minds • Shaping the Future".

PolyU website: www.polyu.edu.hk

Media contact: 

Ms Michelle Li, Communications and Public Affairs Office, PolyU
Telephone: +(852)-3400-2128 / 9162-8048     
E-mail: michelle.sp.li@polyu.edu.hk